22" Industrial Heavy-duty Wood Bandsaw

Add to inquiry box

Production information

YES-22LZ 22" Industrial Wood Bandsaw with Brake

If you need one powerful, industrial and precision cutting machine, then you have to take a look YES-22LG.
YES-22LG has a 21-5/8" throat depth that incorporates a patented blade guide system helps keep the blade perfectly aligned for precise cuts. A foot brake is also included as well as a quick change blade system.
YES-22LG runs on 220 volt single phase power and has a 5 hp motor that operates at 4900 rpm. YES-22LG wood bandsaw for sale is built to last with its fully welded steel frame. The enormous 23" x 30" all cast iron table, has the ability to tilt to 45 degrees.

Band Saw Identification

Wood Bandsaw Features

The bandsaw is without a doubt one of the most useful and versatile pieces of equipment that any woodworker can have. This is mainly due to its ability to cut deep sections as well as curved and straight lines.

Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.

Cast iron wheels

If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.

5 horse power motor for wood cutting bandsaw

5 HP MOTOR

Much powerful 5 horse power and made by cast iron. The advantage is the higher horse power will bring the higher cutting capacity.

Safety mag switch

Keyed lockout safety mag switch adds operator safety and protects motor from overload.

Massive C type blade guide

10 point quick-set guide system is accurate and easy to set up.
A patented blade guide system helps keep the blade perfectly aligned for precise cuts.

Foot brake system

Foot brake with safety electrical lock out delivers quick braking and increased operator control.

Foot brake system for wood cutting bandsaw

Finger protector

Unique short stock feed system keeps hands free from injury.

Cast iron table

The 20" x 24" all cast iron table /w T-slot x 2 pcs, and has the ability to tilt to 45 degrees

Cast iron table for wood cutting bandsaw

Band saw optional accessories

There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.

Q Fence Assy for wood cutting bandsaw — Q Fence Assy

RS Fence Assy for wood cutting bandsaw — RS Fence Assy

Laser Liner device with Magnetron for wood cutting bandsaw — Laser Liner device with Magnetron

LED Light W/ Magnet Seat for wood cutting bandsaw — LED Light W/ Magnet Seat

Miter gauge fence jig for wood cutting bandsaw — Miter gauge fence jig

1. Industrial and quality 5 HP motor that operates at 4900 rpm
2. Heavy-duty one-piece frame
3. The enormous 23” x 30” all cast iron table, has the ability to tilt to 45 degrees
4. Includes Deluxe Excalibur bandsaw rip fence system and miter gauge
5. Cutting height 16” with a 21-5/8” throat depth
6. Dynamically balanced cast-iron wheels
7. Convenient blade tension adjustment hand wheel with tension scale.
8. Safety foot brake simultaneously slows down
9. Magnetic safety switch with lock-out switch
10. With curved guide block and a 6” wooden rip fence.
11. Finger protector removes the need to bring your fingers close to the cutting blade and down depending on your depth of cut.

左右尚有資訊

Model No.	YES-22LZ
Wheel Diameter	22" (560mm)
Throat Capacity(Left of Blade)	21½" (546mm)
Max. Resaw Height	16"(406mm)
Motor Size	5HP
Motor Voltage	220V
Blade Capacity	¼" - 1¼" (6mm~32mm)
Blade Length	172" (4370mm)
Blade Speed(FPM)	4900
Blade Release	Handlewheel
Table Size	23" x 30" (584mm x 762mm)
Dust Port	Cast lron
Table Tilt	0°~45°
Table Bracket	Cast lron
Machine Weight(KGS)	407 KGS
Footprint	42" x 61" x 86"

Advantages

Specifications