14" 2HP Vertical Wood Working Bandsaw

Add to inquiry box

Production information

YES-14LZFB Vertical Wood Working Bandsaw

YES-14LZFB has many features that make this an excellent choice for your workshop.
Three speeds 1430, 2300, and 3250 FPM allows you cut different materials, which saves you cost to buy different types of bandsaw.
A powerful 2 horsepower has all the power you need to cut whether you are ripping, crosscutting, or resawing. This bandsaw has multi-purpose function, which will be the best choice for your workshop.

Band Saw Identification

Wood Bandsaw Features

The bandsaw is without a doubt one of the most useful and versatile pieces of equipment that any woodworker can have. This is mainly due to its ability to cut deep sections as well as curved and straight lines.

Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.

Quick release blade tension

A properly tensioned blade is essential for making
accurate cuts and is a prerequisite for making
many bandsaw adjustments. The blade tension is
adjusted by rotating the blade tension lever.

Cast iron wheels

If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.

2 horse power motor for wood cutting bandsaw

2 HP MOTOR

Much powerful 2 horse power. The advantage is the highr horse power will bring the higher cutting capacity.

Table bracket and Trunnion

Cast iron table bracket
Aluminum trunnion
Stable struction
Use smoothly

Gear type guide post

Better than manual type guide post
Sturdy construction
Simple operation
High precision

Ball bearing blade guide

Micro-adjustment dual-bearing system
Longer guide and blade life
Double sealed bearings

Cast iron table

The table can tilt up to 45 degrees to the right
Sturdy construction
14"x 14"all cast iron table /w T-slot
Precision ground table

Band saw optional accessories

There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.

Q Fence Assy for wood cutting bandsaw — Q Fence Assy

RS Fence Assy for wood cutting bandsaw — RS Fence Assy

Laser Liner device with Magnetron for wood cutting bandsaw — Laser Liner device with Magnetron

LED Light W/ Magnet Seat for wood cutting bandsaw — LED Light W/ Magnet Seat

Miter gauge fence jig for wood cutting bandsaw — Miter gauge fence jig

1. The powerful 2HP motor
2. Fully welded steel frame for added stability
3. 13" resaw capability
4. Includes a heavy duty rip fence and miter gauge.
5. Cutting height 13” and has a large 13-5/8” throat depth.
6. The table can tilt up to 45 degrees to the right and up to 10 degrees on the left supported on a one-piece trunnion system.
7. Quick release blade system
8. Rack and pinion depth of cut adjustment
9. CNC balanced, cast iron wheels
10. Co-planar adjustment
11. Large, precision ground cast iron table 16" x 20"
12. A third locking point to ensure the table stays where you want it.
13. Three speeds 1430, 2300, an 3250 FPM

左右尚有資訊

Model No.	YES-14LZFB
Wheel Diameter	14"
Throat Capacity(Left of Blade)	13⅝"
Max. Resaw Height	13"
Motor Size	2HP
Motor Voltage	220V,1PH,2P
Switch Type	Magnetic
Blade Capacity	⅜"~ ¾"(6mm~19mm)
Blade Length	2900mm
Blade Speed(FPM)	1430, 2300, 3250
Blade Release	Quick Release
Table Size	16"x 20"
Table Type	Cast lron
Table Tilt	0°~45°
Table Bracket	Cast lron
Dust Port	4"(2PCS)
Floor to Table Height	36½"
Machine Weight(KGS)	117 KGS
Country of Origin	Taiwan

Advantages

Specifications