YES-22LZ 22" Industrial Wood Bandsaw with Brake
- If you need one powerful, industrial and precision cutting machine, then you have to take a look YES-22LG.
- YES-22LG has a 21-5/8" throat depth that incorporates a patented blade guide system helps keep the blade perfectly aligned for precise cuts. A foot brake is also included as well as a quick change blade system.
- YES-22LG runs on 220 volt single phase power and has a 5 hp motor that operates at 4900 rpm. YES-22LG wood bandsaw for sale is built to last with its fully welded steel frame. The enormous 23" x 30" all cast iron table, has the ability to tilt to 45 degrees.
Band Saw Identification
![Wood cutting Band Saw Identification](https://www.yes.com.tw/archive/image/pic-22lz__2_.png)
![Wood cutting Band Saw Identification](https://www.yes.com.tw/archive/image/pic-22lz__1_.png)
Wood Bandsaw Features
The bandsaw is without a doubt one of the most useful and versatile pieces of equipment that any woodworker can have. This is mainly due to its ability to cut deep sections as well as curved and straight lines.
Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.
Cast iron wheels
If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.
![Cast iron wheels for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/02-ice72e.jpg)
![5 horse power motor for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/01-mj6vek.jpg)
5 HP MOTOR
Much powerful 5 horse power and made by cast iron. The advantage is the higher horse power will bring the higher cutting capacity.
Safety mag switch
Keyed lockout safety mag switch adds operator safety and protects motor from overload.
![Safety mag switch for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/06-1hpsmh.jpg)
![Massive C type blade guide for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/05-e63ehv.jpg)
Massive C type blade guide
- 10 point quick-set guide system is accurate and easy to set up.
- A patented blade guide system helps keep the blade perfectly aligned for precise cuts.
Foot brake system
Foot brake with safety electrical lock out delivers quick braking and increased operator control.
![Foot brake system for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/04-7z59mc.jpg)
![Finger protector for wood cutting bandsaw](https://www.yes.com.tw/archive/image/09.jpg)
Finger protector
Unique short stock feed system keeps hands free from injury.Cast iron table
The 20" x 24" all cast iron table /w T-slot x 2 pcs, and has the ability to tilt to 45 degrees
![Cast iron table for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/03-y2h4b5.jpg)
There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.
![Q Fence Assy for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/未命名-cmdfan.png)
Q Fence Assy
![RS Fence Assy for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/rs-fence-xaih7f.jpg)
RS Fence Assy
![Laser Liner device with Magnetron for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/pro-a-0202_laser-liner-device-with-magnetron-pjb53c.png)
Laser Liner device with Magnetron
![6](https://www.yes.com.tw/archive/image/uploads/pro-a-01p-d0710_resaw-plane-wooden-r5dk1i.jpg)
6"(150mm) Resaw Plane
![LED Light W/ Magnet Seat for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/90103-hvfwno.jpg)
LED Light W/ Magnet Seat
![Miter gauge fence jig for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/003-(2)-thvuwx.jpg)
Miter gauge fence jig
2. Heavy-duty one-piece frame
3. The enormous 23” x 30” all cast iron table, has the ability to tilt to 45 degrees
4. Includes Deluxe Excalibur bandsaw rip fence system and miter gauge
5. Cutting height 16” with a 21-5/8” throat depth
6. Dynamically balanced cast-iron wheels
7. Convenient blade tension adjustment hand wheel with tension scale.
8. Safety foot brake simultaneously slows down
9. Magnetic safety switch with lock-out switch
10. With curved guide block and a 6” wooden rip fence.
11. Finger protector removes the need to bring your fingers close to the cutting blade and down depending on your depth of cut.
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-22LZ |
Wheel Diameter | 22" (560mm) |
Throat Capacity(Left of Blade) | 21½" (546mm) |
Max. Resaw Height | 16"(406mm) |
Motor Size | 5HP |
Motor Voltage | 220V |
Blade Capacity | ¼" - 1¼" (6mm~32mm) |
Blade Length | 172" (4370mm) |
Blade Speed(FPM) | 4900 |
Blade Release | Handlewheel |
Table Size | 23" x 30" (584mm x 762mm) |
Dust Port | Cast lron |
Table Tilt | 0°~45° |
Table Bracket | Cast lron |
Machine Weight(KGS) | 407 KGS |
Footprint | 42" x 61" x 86" |
2. Heavy-duty one-piece frame
3. The enormous 23” x 30” all cast iron table, has the ability to tilt to 45 degrees
4. Includes Deluxe Excalibur bandsaw rip fence system and miter gauge
5. Cutting height 16” with a 21-5/8” throat depth
6. Dynamically balanced cast-iron wheels
7. Convenient blade tension adjustment hand wheel with tension scale.
8. Safety foot brake simultaneously slows down
9. Magnetic safety switch with lock-out switch
10. With curved guide block and a 6” wooden rip fence.
11. Finger protector removes the need to bring your fingers close to the cutting blade and down depending on your depth of cut.
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-22LZ |
Wheel Diameter | 22" (560mm) |
Throat Capacity(Left of Blade) | 21½" (546mm) |
Max. Resaw Height | 16"(406mm) |
Motor Size | 5HP |
Motor Voltage | 220V |
Blade Capacity | ¼" - 1¼" (6mm~32mm) |
Blade Length | 172" (4370mm) |
Blade Speed(FPM) | 4900 |
Blade Release | Handlewheel |
Table Size | 23" x 30" (584mm x 762mm) |
Dust Port | Cast lron |
Table Tilt | 0°~45° |
Table Bracket | Cast lron |
Machine Weight(KGS) | 407 KGS |
Footprint | 42" x 61" x 86" |