YES-14LV 14 inch bench type band saw
- If you need an economic, versatile and precision bandsaw, then please check out YES-14LV.
- The 14" bandsaw YES-14LV is loaded with features from top to bottom!
This band saw is equipped a powerful 1HP motor and features a 14" x 14" work table.
- With resaw capacity at 7", precision balanced cast iron wheels and 2 working speeds.
Other features include quick tension release, large ON/OFF switch, upper and lower blade guides, tilting table and overall high quality construction..
Band Saw Identification
![](https://www.yes.com.tw/archive/image/cx104_104.png)
Wood Bandsaw Features
The bandsaw is without a doubt one of the most useful and versatile pieces of equipment that any woodworker can have. This is mainly due to its ability to cut deep sections as well as curved and straight lines.
Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.
![Quick release blade tension for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/003-ma3qx1.jpg)
Quick release blade tension
A properly tensioned blade is essential for making
accurate cuts and is a prerequisite for making
many bandsaw adjustments. The blade tension is
adjusted by rotating the blade tension lever.
Cast iron wheels
If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.
![Cast iron wheels for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/pic-14lv-(13)-9edeuj.jpg)
![1 horse power motor for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/pic-14lv-(11)-9kj7q1.jpg)
1 HP MOTOR
Much powerful horse power 1HP than the 10" bandsaw in the market. Almost 10" bandsaw is 1/2" or 1/4" horse power. The advantage is the highr horse power will bring the higher cutting capacity.
Extension Table
- Increase the scope of work
- Easy assembly
- Made by steel
![Extension Table for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/延伸檯面-jjjc86.jpg)
![Manual type guide post for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/導桿-6vrajv.jpg)
Manual type guide post
- Sturdy construction
- Simple and easy operation
- Cast iron guide post base
Ball bearing blade guide
- Micro-adjustment dual-bearing system
- Longer guide and blade life
- Double sealed bearings
![Ball bearing blade guide for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/pic-14lv-(5)-73w39e.jpg)
![Cast iron table for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/011-y58hta.jpg)
Cast iron table
- The table can tilt up to 45 degrees to the right
- Sturdy construction
- 14"x 14"all cast iron table /w T-slot
- Precision ground table
There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.
![Q Fence Assy for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/未命名-cmdfan.png)
Q Fence Assy
![J Fence Assy for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/j-fence-123-uyf1ms.jpg)
J Fence Assy
![Semi-close stand for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/14lv-stand-rc4itj.png)
Semi-close stand
![Bakelite Type Bandsaw Blade Guide for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/電木導座-y49tcs.jpg)
Bakelite Type Bandsaw Blade Guide
![Bearings Type Bandsaw Blade Guide for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/上五下三培林導座組-c36v4z.jpg)
Bearings Type Bandsaw Blade Guide
![Miter gauge fence jig for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/003-(2)-thvuwx.jpg)
Miter gauge fence jig
- A powerful 1HP motor
- All cast iron 14" x 14" work table.
- With resaw capacity at 7"
- 2 working speeds
- large ON/OFF switch
- Upper body solid one piece steel frame construction
- Precision Balanced Cast Iron Wheels
- Quick Release Blade Tension Lever
- Precision Ground Tilting Table
- Includes a blade and Solid Miter Gauge
- Upper and Lower Blade Guides
- Includes a Semi type stand
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No | YES-14LV |
Wheel Diameter | 14" |
Throat Capacity(Left of Blade) | 13-5/8"(346mm) |
Max. Resaw Height | 7" |
Motor Size | 1HP |
Motor Voltage | 110 |
Blade Capacity | 1/8"-3/4" |
Blade Length | 101" |
Blade Speed(FPM) | 2300,3250 |
Blade Release | Quick Release |
Table Size | 14" x 14" |
Table Type | Cast lron |
Table Tilt | 0°~45° |
Table Bracket | Cast lron |
Machine Weight(KGS) | 39 KGS |
Footprint | 63(Body) / 15(Stand) kgs 67(Body) / 27(Stand) kgs |
- A powerful 1HP motor
- All cast iron 14" x 14" work table.
- With resaw capacity at 7"
- 2 working speeds
- large ON/OFF switch
- Upper body solid one piece steel frame construction
- Precision Balanced Cast Iron Wheels
- Quick Release Blade Tension Lever
- Precision Ground Tilting Table
- Includes a blade and Solid Miter Gauge
- Upper and Lower Blade Guides
- Includes a Semi type stand
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No | YES-14LV |
Wheel Diameter | 14" |
Throat Capacity(Left of Blade) | 13-5/8"(346mm) |
Max. Resaw Height | 7" |
Motor Size | 1HP |
Motor Voltage | 110 |
Blade Capacity | 1/8"-3/4" |
Blade Length | 101" |
Blade Speed(FPM) | 2300,3250 |
Blade Release | Quick Release |
Table Size | 14" x 14" |
Table Type | Cast lron |
Table Tilt | 0°~45° |
Table Bracket | Cast lron |
Machine Weight(KGS) | 39 KGS |
Footprint | 63(Body) / 15(Stand) kgs 67(Body) / 27(Stand) kgs |