YES-14LZFB Vertical Wood Working Bandsaw
- YES-14LZFB has many features that make this an excellent choice for your workshop.
Three speeds 1430, 2300, and 3250 FPM allows you cut different materials, which saves you cost to buy different types of bandsaw.
- A powerful 2 horsepower has all the power you need to cut whether you are ripping, crosscutting, or resawing. This bandsaw has multi-purpose function, which will be the best choice for your workshop.
Band Saw Identification
![Wood cutting Band Saw Identification](https://www.yes.com.tw/archive/image/14lzfb-003.jpg)
Wood Bandsaw Features
The bandsaw is without a doubt one of the most useful and versatile pieces of equipment that any woodworker can have. This is mainly due to its ability to cut deep sections as well as curved and straight lines.
Taking up minimal floor space and with a vast range of blades available, the bandsaw is an indispensable asset. The ability to rip, cross-cut, resaw, cut wafer thin veneers, tenon cheeks, bevels, curves and even circles makes the bandsaw the most versatile machine in the workshop.
![Quick release blade tension for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/line_album_20211229-_1_211229_15-cjb727.jpg)
Quick release blade tension
A properly tensioned blade is essential for making
accurate cuts and is a prerequisite for making
many bandsaw adjustments. The blade tension is
adjusted by rotating the blade tension lever.
Cast iron wheels
If the wheels are heavier, you will have more inertia, which would help in handling peak loads. It follows that any operation where the blade is bogged down for a short while, the heavier wheels will get you through more likely.
![Cast iron wheels for wood cutting bandsaw](https://www.yes.com.tw/archive/image/pic-14lzfb__3_.jpg)
![2 horse power motor for wood cutting bandsaw](https://www.yes.com.tw/archive/image/pic-14lzfb__2.1_.jpg)
2 HP MOTOR
Much powerful 2 horse power. The advantage is the highr horse power will bring the higher cutting capacity.
Table bracket and Trunnion
- Cast iron table bracket
- Aluminum trunnion
- Stable struction
- Use smoothly
![](https://www.yes.com.tw/archive/image/pic-14lzfb__4_.jpg)
![Gear type guide post for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/277-sd-20190909-yes(ws14x10)-(21)-eikunv.jpg)
Gear type guide post
- Better than manual type guide post
- Sturdy construction
- Simple operation
- High precision
Ball bearing blade guide
- Micro-adjustment dual-bearing system
- Longer guide and blade life
- Double sealed bearings
![Ball bearing blade guide for wood cutting bandsaw](https://www.yes.com.tw/archive/image/pic-14lzfb__10_.jpg)
![Cast iron table for wood cutting bandsaw](https://www.yes.com.tw/archive/image/pic-14lzfb__1_.jpg)
Cast iron table
- The table can tilt up to 45 degrees to the right
- Sturdy construction
- 14"x 14"all cast iron table /w T-slot
- Precision ground table
There are multipurpose optional accessories for bandsaw, which will increase the working efficiency and add the possibilities for more cutting methods.
![Q Fence Assy for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/未命名-cmdfan.png)
Q Fence Assy
![RS Fence Assy for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/rs-fence-78os5l.jpg)
RS Fence Assy
![Laser Liner device with Magnetron for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/紅外線雷射器-10rzz.jpg)
Laser Liner device with Magnetron
![6](https://www.yes.com.tw/archive/image/uploads/基準座木靠板-lhmrxe.jpg)
6"(150mm) Resaw Plane
![LED Light W/ Magnet Seat for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/90103-qge9a0.jpg)
LED Light W/ Magnet Seat
![Miter gauge fence jig for wood cutting bandsaw](https://www.yes.com.tw/archive/image/uploads/003-(2)-thvuwx.jpg)
Miter gauge fence jig
2. Fully welded steel frame for added stability
3. 13" resaw capability
4. Includes a heavy duty rip fence and miter gauge.
5. Cutting height 13” and has a large 13-5/8” throat depth.
6. The table can tilt up to 45 degrees to the right and up to 10 degrees on the left supported on a one-piece trunnion system.
7. Quick release blade system
8. Rack and pinion depth of cut adjustment
9. CNC balanced, cast iron wheels
10. Co-planar adjustment
11. Large, precision ground cast iron table 16" x 20"
12. A third locking point to ensure the table stays where you want it.
13. Three speeds 1430, 2300, an 3250 FPM
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-14LZFB |
Wheel Diameter | 14" |
Throat Capacity(Left of Blade) | 13⅝" |
Max. Resaw Height | 13" |
Motor Size | 2HP |
Motor Voltage | 220V,1PH,2P |
Switch Type | Magnetic |
Blade Capacity | ⅜"~ ¾"(6mm~19mm) |
Blade Length | 2900mm |
Blade Speed(FPM) | 1430, 2300, 3250 |
Blade Release | Quick Release |
Table Size | 16"x 20" |
Table Type | Cast lron |
Table Tilt | 0°~45° |
Table Bracket | Cast lron |
Dust Port | 4"(2PCS) |
Floor to Table Height | 36½" |
Machine Weight(KGS) | 117 KGS |
Country of Origin | Taiwan |
2. Fully welded steel frame for added stability
3. 13" resaw capability
4. Includes a heavy duty rip fence and miter gauge.
5. Cutting height 13” and has a large 13-5/8” throat depth.
6. The table can tilt up to 45 degrees to the right and up to 10 degrees on the left supported on a one-piece trunnion system.
7. Quick release blade system
8. Rack and pinion depth of cut adjustment
9. CNC balanced, cast iron wheels
10. Co-planar adjustment
11. Large, precision ground cast iron table 16" x 20"
12. A third locking point to ensure the table stays where you want it.
13. Three speeds 1430, 2300, an 3250 FPM
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-14LZFB |
Wheel Diameter | 14" |
Throat Capacity(Left of Blade) | 13⅝" |
Max. Resaw Height | 13" |
Motor Size | 2HP |
Motor Voltage | 220V,1PH,2P |
Switch Type | Magnetic |
Blade Capacity | ⅜"~ ¾"(6mm~19mm) |
Blade Length | 2900mm |
Blade Speed(FPM) | 1430, 2300, 3250 |
Blade Release | Quick Release |
Table Size | 16"x 20" |
Table Type | Cast lron |
Table Tilt | 0°~45° |
Table Bracket | Cast lron |
Dust Port | 4"(2PCS) |
Floor to Table Height | 36½" |
Machine Weight(KGS) | 117 KGS |
Country of Origin | Taiwan |