YES-830-A3 8" x 30" Turret Milling Machine
l This 8" x 30" Vertical Milling Machine includes all the same features as its 6" x 26" little brother, but is constructed with a heavy, one-piece casting for even greater rigidity and an extra 300 pounds of mass.
l It also accommodates up to a 14" swing and 20" between table and spindle. Features a built-in drain and cabinet designed to accept aftermarket coolant systems, making it readily upgradable. Available with or without longitudinal power feed.
![8](https://www.yes.com.tw/archive/image/uploads/1111-6yub28.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/1112-cbv2s0.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/1113-cc0rvw.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/1114-mws4s6.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/1115-1ns15z.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/1116-uwzg9r.jpg)
Milling Machine Features
Basically the milling machines are divided into two types first is horizontal milling machine and second one is vertical milling machine. They are further classified as knee-type, ram-type, manufacturing or bed type and planer-type milling machine.
- Adjustable table stops for accurate stops for cuts and repeatability
- Head tilts to 90° both ways. 360° rotation on horizontal surface
- Scrapping technology X,Y & Z. PS : The scrap technology is considered as the fundamental of the accuracy of precision machine tools.
- Hardened & ground column and knee slideways.
- Solid cast iron construction throughout.
- Spindle stop with micro-adjustable setting.
- Chrome plated precision ground quill.
- Heavy-duty saddle supports full width of table.
- High precision ground vertical and cross ways.
- Class 7 spindle bearings.
- Lower noise and convenient operation.
- Table locks for high rigidity.
- Adjustable travel stops on X & Y.
- Fold up safety handles.
- Dovetail ways X,Y & X.
- Adjustable gibs.
- Fine down feed on quill on table.
- Standard:Working Linght、Drawbar.
Milling Machine optional accessories
There are multipurpose optional accessories for milling machine, which will increase the working efficiency and add the possibilities for more cutting methods.
![Chip Tray for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/銑床用水盤-kt2ptg.jpg)
Chip Tray
![Chip Tray for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/左右自動進刀器-m256c4.jpg)
Power Feed
![Chip Tray for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/注水系統(冷卻幫浦)-wwgcaa.jpg)
Coolant System
![Quartz Lamp for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/石英工作燈-(細節)-4f7h0h.jpg)
Quartz Lamp
![2 axis DRO System for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/二軸光學尺(x,y)-1lps8h.jpg)
2 axis DRO System
![3 axis DRO System for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/三軸光學尺(x,y,z)-p8dmwf.jpg)
3 axis DRO System
![Milling Vise for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/虎鉗-(有盤)-sx9sqr.jpg)
Milling Vise
![Clamping Kits for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/夾具組-12-52pcs、58-52pcs-39pqjg.jpg)
Clamping Kits
![Milling Chuck for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/彈性筒夾組nt30-er32-7pfrid.jpg)
Milling Chuck
- Adjustable table stops for accurate stops for cuts and repeatability
- Head tilts to 90° both ways. 360° rotation on horizontal surface
- Scrapping technology X,Y & Z. PS : The scrap technology is considered as the fundamental of the accuracy of precision machine tools.
- Hardened & ground column and knee slideways.
- Solid cast iron construction throughout.
- Spindle stop with micro-adjustable setting.
- Chrome plated precision ground quill.
- Heavy-duty saddle supports full width of table.
- High precision ground vertical and cross ways.
- Class 7 spindle bearings.
- Lower noise and convenient operation.
- Table locks for high rigidity.
- Adjustable travel stops on X & Y.
- Fold up safety handles.
- Dovetail ways X,Y & X.
- Adjustable gibs.
- Fine down feed on quill on table.
- Standard:Working Linght、Drawbar.
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-830-A3 |
Spindle Taper | MT3 or R8 or NT30 or NT40 |
Spindle Max. Travel | 5" (127 mm) |
Spindle Feeding | Manual / Auto feeding by 3 steps 0.04 , 0.08, 0.15 |
Spindle Speeds | 90~2780 RPM (8 speeds) |
Distance, Spindle To Table Surface (Z) | 2.5"~19" (65~480 mm) |
Size Of Working Table | 8" x 30" (205 x 760mm) |
T-Slots Size (Number) | 3/8" (3 slots) |
Longitudinal Table Travel (X) | 18½" (470 mm) |
Cross Table Travel (Y) | 8" (200 mm) |
Vertical Travel Of Table (Z) | 18.1" (460 mm) |
Motor | 2HP / 3PH |
Swing | 6.5"~18" (165~457 mm) |
Lead Screw for Drill Chuck | 1"*8 TPI or 3mm Pitch |
Vertical Head Tilt Angle (R&L) | 90° |
Ram Swiveling Angle | 360° |
Net Weight | 470 KGS |
Gross Weight | 520 KGS |
- Adjustable table stops for accurate stops for cuts and repeatability
- Head tilts to 90° both ways. 360° rotation on horizontal surface
- Scrapping technology X,Y & Z. PS : The scrap technology is considered as the fundamental of the accuracy of precision machine tools.
- Hardened & ground column and knee slideways.
- Solid cast iron construction throughout.
- Spindle stop with micro-adjustable setting.
- Chrome plated precision ground quill.
- Heavy-duty saddle supports full width of table.
- High precision ground vertical and cross ways.
- Class 7 spindle bearings.
- Lower noise and convenient operation.
- Table locks for high rigidity.
- Adjustable travel stops on X & Y.
- Fold up safety handles.
- Dovetail ways X,Y & X.
- Adjustable gibs.
- Fine down feed on quill on table.
- Standard:Working Linght、Drawbar.
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-830-A3 |
Spindle Taper | MT3 or R8 or NT30 or NT40 |
Spindle Max. Travel | 5" (127 mm) |
Spindle Feeding | Manual / Auto feeding by 3 steps 0.04 , 0.08, 0.15 |
Spindle Speeds | 90~2780 RPM (8 speeds) |
Distance, Spindle To Table Surface (Z) | 2.5"~19" (65~480 mm) |
Size Of Working Table | 8" x 30" (205 x 760mm) |
T-Slots Size (Number) | 3/8" (3 slots) |
Longitudinal Table Travel (X) | 18½" (470 mm) |
Cross Table Travel (Y) | 8" (200 mm) |
Vertical Travel Of Table (Z) | 18.1" (460 mm) |
Motor | 2HP / 3PH |
Swing | 6.5"~18" (165~457 mm) |
Lead Screw for Drill Chuck | 1"*8 TPI or 3mm Pitch |
Vertical Head Tilt Angle (R&L) | 90° |
Ram Swiveling Angle | 360° |
Net Weight | 470 KGS |
Gross Weight | 520 KGS |