YES-830 8" x 30" Vertical Milling Machine
l This 8" x 30" Vertical Milling Machine includes all the same features as its 6" x 26" little brother, but is constructed with a heavy, one-piece casting for even greater rigidity and an extra 300 pounds of mass.
l It also accommodates up to a 14" swing and 20" between table and spindle. Features a built-in drain and cabinet designed to accept aftermarket coolant systems, making it readily upgradable. Available with or without longitudinal power feed.
![8](https://www.yes.com.tw/archive/image/uploads/1-v23vry.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/2-8rlzna.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/3-jyasq4.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/4-e7dzsn.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/5-b0p04z.jpg)
![8](https://www.yes.com.tw/archive/image/uploads/6-fraaxv.jpg)
Milling Machine Features
Basically the milling machines are divided into two types first is horizontal milling machine and second one is vertical milling machine. They are further classified as knee-type, ram-type, manufacturing or bed type and planer-type milling machine.
- Solid cast iron construction throughout.
- Spindle stop with micro-adjustable setting.
- Chrome plated precision ground quill.
- Table locks for high rigidity.
- Heavy-duty saddle supports full width of table.
- High precision ground vertical and cross ways.
- Class 7 spindle bearings.
- Lower noise and convenient operation.
- Dovetail ways X,Y & Z.
- Adjustable gibs on table.
- Fine down feed on quill.
- Head tilts to 90° both ways. 360° rotation on horizontal surface.
- Adjustable table stops for accurate stops for cuts and repeatability.
- Variable speed frequency drive allows speeds from 200 to 2250 RPM.
- Forward/Reversing switch with emergency stop.
- Fold up safety handles.
- Adjustable travel stops on X, Y & Z.
- Scrapping technology X,Y & Z.
Milling Machine optional accessories
There are multipurpose optional accessories for milling machine, which will increase the working efficiency and add the possibilities for more cutting methods.
![Chip Tray for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/銑床用水盤-kt2ptg.jpg)
Chip Tray
![Power Feed for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/左右自動進刀器-m256c4.jpg)
Power Feed
![Coolant System for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/注水系統(冷卻幫浦)-wwgcaa.jpg)
Coolant System
![Quartz Lamp for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/石英工作燈-(細節)-4f7h0h.jpg)
Quartz Lamp
![2 axis DRO System for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/二軸光學尺(x,y)-1lps8h.jpg)
2 axis DRO System
![3 axis DRO System for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/三軸光學尺(x,y,z)-p8dmwf.jpg)
3 axis DRO System
![Milling Vise for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/虎鉗-(有盤)-sx9sqr.jpg)
Milling Vise
![Clamping Kits for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/夾具組-12-52pcs、58-52pcs-39pqjg.jpg)
Clamping Kits
![Milling Chuck for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/彈性筒夾組nt30-er32-7pfrid.jpg)
Milling Chuck
- Adjustable travel stops on X, Y, & Z.
- Fold up safety handles.
- Head tilts to 90° both ways. 360° rotation on horizontal surface.
- Lower noise and convenient operation.
- Table locks for high rigidity.
- Solid cast iron construction throughout machine.
- Spindle stop with micro-adjustable setting.
- High precision ground vertical and cross ways.
9. This machine compared to other similar products belongs to high quality level.
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-830 |
Spindle Taper | MT3 or R8 or NT30 |
Spindle Max. Travel | 3½" (88.9 mm) |
Spindle Feeding | Manual |
Spindle Speeds | 230-3200 RPM (9 speeds) |
Distance, Spindle To Table Surface (Z) | 2.5"~19" (65~480 mm) |
Size Of Working Table | 8" x 30" (205 x 760mm) |
T-Slots Size (Number) | 3/8" (3 slots) |
Longitudinal Table Travel (X) | 18½" (470 mm) |
Cross Table Travel (Y) | 8" (200 mm) |
Vertical Travel Of Table (Z) | 18" (455 mm) |
Motor | 1.5HP (1PH or 3PH) |
Swing | 7.6" (195 mm) |
Lead Screw for Drill Chuck | 1"*8 TPI or 3mm Pitch |
Vertical Head Tilt Angle (R&L) | 90° |
Ram Swiveling Angle | 360° |
Net Weight | 373 KGS |
Gross Weight | 453 KGS |
Machine Dimensions | 19" x 36" |
- Adjustable travel stops on X, Y, & Z.
- Fold up safety handles.
- Head tilts to 90° both ways. 360° rotation on horizontal surface.
- Lower noise and convenient operation.
- Table locks for high rigidity.
- Solid cast iron construction throughout machine.
- Spindle stop with micro-adjustable setting.
- High precision ground vertical and cross ways.
9. This machine compared to other similar products belongs to high quality level.
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-830 |
Spindle Taper | MT3 or R8 or NT30 |
Spindle Max. Travel | 3½" (88.9 mm) |
Spindle Feeding | Manual |
Spindle Speeds | 230-3200 RPM (9 speeds) |
Distance, Spindle To Table Surface (Z) | 2.5"~19" (65~480 mm) |
Size Of Working Table | 8" x 30" (205 x 760mm) |
T-Slots Size (Number) | 3/8" (3 slots) |
Longitudinal Table Travel (X) | 18½" (470 mm) |
Cross Table Travel (Y) | 8" (200 mm) |
Vertical Travel Of Table (Z) | 18" (455 mm) |
Motor | 1.5HP (1PH or 3PH) |
Swing | 7.6" (195 mm) |
Lead Screw for Drill Chuck | 1"*8 TPI or 3mm Pitch |
Vertical Head Tilt Angle (R&L) | 90° |
Ram Swiveling Angle | 360° |
Net Weight | 373 KGS |
Gross Weight | 453 KGS |
Machine Dimensions | 19" x 36" |