6" x 26" Vertical Milling Machine
l This 6" x 26" Vertical Milling Machine is carefully built in Taiwan with heavy castings throughout for rigidity and accuracy.
l The headstock tilts left or right 45° and rotates up to 90° in both directions, so you're not limited when it comes time to machine complex angles.
l To ensure maximum power for 110V operation, we used a 1-1/2 HP TEFC spindle motor.
l Speed changes are quick and easy with a stepped-pulley V-belt drive system.
l To keep table movement gliding effortlessly, all ways are lubricated with a one-shot oiler system.
![6](https://www.yes.com.tw/archive/image/uploads/01-c45hem.jpg)
![6](https://www.yes.com.tw/archive/image/uploads/02-reltj8.jpg)
![6](https://www.yes.com.tw/archive/image/uploads/03-h04wmc.jpg)
![6](https://www.yes.com.tw/archive/image/uploads/07-i800dt.jpg)
![6](https://www.yes.com.tw/archive/image/uploads/04-mcpc1l.jpg)
![6](https://www.yes.com.tw/archive/image/uploads/05-77ilu4.jpg)
Milling Machine Features
Basically the milling machines are divided into two types first is horizontal milling machine and second one is vertical milling machine. They are further classified as knee-type, ram-type, manufacturing or bed type and planer-type milling machine.
- Solid cast iron construction throughout.
- Spindle stop with micro-adjustable setting.
- Chrome plated precision ground quill.
- Table locks for high rigidity.
- Heavy-duty saddle supports full width of table.
- High precision ground vertical and cross ways.
- Class 7 spindle bearings.
- Lower noise and convenient operation.
- Dovetail ways X,Y & Z.
- Adjustable gibs on table.
- Fine down feed on quill.
- Head tilts to 90° both ways. 360° rotation on horizontal surface.
- Adjustable table stops for accurate stops for cuts and repeatability.
- Variable speed frequency drive allows speeds from 200 to 2250 RPM.
- Forward/Reversing switch with emergency stop.
- Fold up safety handles.
- Adjustable travel stops on X, Y & Z.
- Scrapping technology X,Y & Z.
Milling Machine optional accessories
There are multipurpose optional accessories for milling machine, which will increase the working efficiency and add the possibilities for more cutting methods.
![Enclose Stand for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/626、626i用腳座-8fuomy.jpg)
Enclose Stand
![Power Feed for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/左右自動進刀器-m256c4.jpg)
Power Feed
![Coolant System for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/注水系統(冷卻幫浦)-wwgcaa.jpg)
Coolant System
![Quartz Lamp for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/石英工作燈-(細節)-4f7h0h.jpg)
Quartz Lamp
![2 axis DRO System for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/二軸光學尺(x,y)-1lps8h.jpg)
2 axis DRO System
![3 axis DRO System for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/三軸光學尺(x,y,z)-p8dmwf.jpg)
3 axis DRO System
![Milling Vise for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/虎鉗-(有盤)-sx9sqr.jpg)
Milling Vise
![Clamping Kits for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/夾具組-12-52pcs、58-52pcs-39pqjg.jpg)
Clamping Kits
![Milling Chuck for High Quality Vertical Milling and Drilling Machine](https://www.yes.com.tw/archive/image/uploads/彈性筒夾組nt30-er32-7pfrid.jpg)
Milling Chuck
- Adjustable travel stops on X, Y, & Z.
- Fold up safety handles.
- Head tilts to 90° both ways. 360° rotation on horizontal surface.
- Lower noise and convenient operation.
- Table locks for high rigidity.
- Solid cast iron construction throughout machine.
- Spindle stop with micro-adjustable setting.
- High precision ground vertical and cross ways.
9. This machine compared to other similar products belongs to high quality level.
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-626 |
Spindle Taper | MT3 or R8 or NT30 |
Spindle Max. Travel | 3'' (75mm) |
Spindle Feeding | Manual |
Spindle Speeds | 500-5,000 RPM |
Distance, Spindle To Table Surface (Z) | 0"-13-3/4"(0-345 mm) |
Size Of Working Table | 6"*26" (152*600 mm) |
T-Slots Size (Number) | 3/8" (3 slots) |
Longitudinal Table Travel (X) | 14-1/2" (370 mm) |
Cross Table Travel (Y) | 6" (150mm) |
Vertical Travel Of Table (Z) | 14-3/4" (325mm) |
Motor | (1PH or 3PH) |
Swing | 6.1" (155 mm) |
Lead Screw for Drill Chuck | 1"*8 TPI or 3mm Pitch |
Vertical Head Tilt Angle (R&L) | 90° |
Ram Swiveling Angle | 360° |
Net Weight | 260 KGS |
Gross Weight | 360 KGS |
Machine Dimensions | 27½" x 21" |
- Adjustable travel stops on X, Y, & Z.
- Fold up safety handles.
- Head tilts to 90° both ways. 360° rotation on horizontal surface.
- Lower noise and convenient operation.
- Table locks for high rigidity.
- Solid cast iron construction throughout machine.
- Spindle stop with micro-adjustable setting.
- High precision ground vertical and cross ways.
9. This machine compared to other similar products belongs to high quality level.
![](https://system21.webtech.com.tw/web/201800521/archive/image/edcontent1/hands-01-512.png)
Model No. | YES-626 |
Spindle Taper | MT3 or R8 or NT30 |
Spindle Max. Travel | 3'' (75mm) |
Spindle Feeding | Manual |
Spindle Speeds | 500-5,000 RPM |
Distance, Spindle To Table Surface (Z) | 0"-13-3/4"(0-345 mm) |
Size Of Working Table | 6"*26" (152*600 mm) |
T-Slots Size (Number) | 3/8" (3 slots) |
Longitudinal Table Travel (X) | 14-1/2" (370 mm) |
Cross Table Travel (Y) | 6" (150mm) |
Vertical Travel Of Table (Z) | 14-3/4" (325mm) |
Motor | (1PH or 3PH) |
Swing | 6.1" (155 mm) |
Lead Screw for Drill Chuck | 1"*8 TPI or 3mm Pitch |
Vertical Head Tilt Angle (R&L) | 90° |
Ram Swiveling Angle | 360° |
Net Weight | 260 KGS |
Gross Weight | 360 KGS |
Machine Dimensions | 27½" x 21" |