Products
Production information
YES-36SPS 5HP Sliding Table Shaper
l Spindle Shaper mainly used for larger woodworking knives to make mass-produced woodworking products.
For example: tenon, 45° processing, surface processing, modeling processing...etc.
l It can be installed with a small trimming machine tool, and can also be automatically fed with a feeder to improve efficiency and save costs.
Spindle Shaper Features
For example: tenon, 45° processing, surface processing, modeling processing...etc.It can be installed with a small trimming machine tool, and can also be automatically fed with a feeder to improve efficiency and save costs.
- We’ve taken our immensely popular YES-36SP shaper and made it even better with a sliding table! Extruded-aluminum sliding table fence and stock hold-down clamp integrated into the miter gauge make shaping ends and awkward-sized workpieces easier and more consistent.
- YES-36SPS handles cutters up to 5-7/8" diameter by 5-1/8" tall.
- The four speed V-belt drive system lets you slow down those big cutters from 10,000 RPM to 3600 RPM.
- A cutter guard is bolted to the precision-ground cast-iron table.
- A micro-adjustable wooden split fence lets you dial in for full edge cutting support.
- Four spring-steel hold downs increase safety and production by holding the workpiece flat on the table and snug against the fence.
- YES-36SPS comes with three interchangeable spindles 3/4", 1", and 1-1/4" plus three table inserts 7" OD x 3-1/2" ID, 3-1/2" OD x 3" ID, and 3" OD x 2"ID.
Spindle shaper optional accessories
There are multipurpose optional accessories for spindle shaper, which will increase the working efficiency and add the possibilities for more cutting methods.
YES-36SPS handles cutters up to 5-7/8" diameter by 5-1/8" tall. The four speed V-belt drive system lets you slow down those big cutters from 10,000 RPM to 3600 RPM.
A cutter guard is bolted to the precision-ground cast-iron table. A micro-adjustable wooden split fence lets you dial in for full edge cutting support. Four spring-steel hold downs increase safety and production by holding the workpiece flat on the table and snug against the fence.
YES-36SPS comes with three interchangeable spindles 3/4", 1", and 1-1/4" plus three table inserts 7" OD x 3-1/2" ID, 3-1/2" OD x 3" ID, and 3" OD x 2"ID.
左右尚有資訊
Model No. | YES-36SPS |
Motor | 5HP/1PH ; 5HP/3PH ; 7.5HP/3PH |
Table Size | 28" x 35½" x 2⅖" (712mm x 902mm x 60mm) |
Dust Hood | HEIGHT: 5.3" WIDTH: 9.1" HOLE: 4" HEIGHT: 135mm WIDTH: 230mm HOLE: 102mm |
Table Insert | 7", 3½", 3" (178mm , 8.9mm , 76mm) |
Spindle Size | 1¼"or 1"or ¾" |
Spindle Travel | 3"(76mm) |
Spindle Speeds | 3600, 5100, 8000, 10000 RPM |
Table Height | 34⅗" (880mm) |
Machine Weight(KGS) | 302 KGS |
Footprint | 110x99x108cm |
Advantages
We’ve taken our immensely popular YES-36SP shaper and made it even better with a sliding table! Extruded-aluminum sliding table fence and stock hold-down clamp integrated into the miter gauge make shaping ends and awkward-sized workpieces easier and more consistent.
YES-36SPS handles cutters up to 5-7/8" diameter by 5-1/8" tall. The four speed V-belt drive system lets you slow down those big cutters from 10,000 RPM to 3600 RPM.
A cutter guard is bolted to the precision-ground cast-iron table. A micro-adjustable wooden split fence lets you dial in for full edge cutting support. Four spring-steel hold downs increase safety and production by holding the workpiece flat on the table and snug against the fence.
YES-36SPS comes with three interchangeable spindles 3/4", 1", and 1-1/4" plus three table inserts 7" OD x 3-1/2" ID, 3-1/2" OD x 3" ID, and 3" OD x 2"ID.
YES-36SPS handles cutters up to 5-7/8" diameter by 5-1/8" tall. The four speed V-belt drive system lets you slow down those big cutters from 10,000 RPM to 3600 RPM.
A cutter guard is bolted to the precision-ground cast-iron table. A micro-adjustable wooden split fence lets you dial in for full edge cutting support. Four spring-steel hold downs increase safety and production by holding the workpiece flat on the table and snug against the fence.
YES-36SPS comes with three interchangeable spindles 3/4", 1", and 1-1/4" plus three table inserts 7" OD x 3-1/2" ID, 3-1/2" OD x 3" ID, and 3" OD x 2"ID.
Specifications
左右尚有資訊
Model No. | YES-36SPS |
Motor | 5HP/1PH ; 5HP/3PH ; 7.5HP/3PH |
Table Size | 28" x 35½" x 2⅖" (712mm x 902mm x 60mm) |
Dust Hood | HEIGHT: 5.3" WIDTH: 9.1" HOLE: 4" HEIGHT: 135mm WIDTH: 230mm HOLE: 102mm |
Table Insert | 7", 3½", 3" (178mm , 8.9mm , 76mm) |
Spindle Size | 1¼"or 1"or ¾" |
Spindle Travel | 3"(76mm) |
Spindle Speeds | 3600, 5100, 8000, 10000 RPM |
Table Height | 34⅗" (880mm) |
Machine Weight(KGS) | 302 KGS |
Footprint | 110x99x108cm |
Related products