• 6
  • 6
  • 6
  • 6
  • 6
  • 6
  • 6
  • 6
  • 6
  • 6
  • 6
  • 6

6" x 26" Vertical Variable Speed Milling Machine

Add to inquiry box
Production information

YES-626I 6" x 26" Vertical Variable Speed Milling Machine

  • A variable frequency drive speed control with digital readout provides infinitely variable blade speeds. Just turn the speed control dial for on-the-fly speed changes.
  • This Machine is carefully built in Taiwan with heavy castings throughout for rigidity and accuracy.
  • The headstock tilts left or right 45° and rotates up to 90° in both directions, so you're not limited when it comes time to machine complex angles.
  • To ensure maximum power for 110V operation, we used a 1-1/2 HP TEFC spindle motor.
  • To keep table movement gliding effortlessly, all ways are lubricated with a one-shot oiler system.
6
6
6
6
6
6

Milling Machine Features

It is a machine which is used to remove metals from the work piece with the help of a revolving cutter called milling cutter. It is used to machined the flat, rough and irregular surfaces and this is done by feeding the work piece against a rotating milling cutter.

Basically the milling machines are divided into two types first is horizontal milling machine and second one is vertical milling machine. They are further classified as knee-type, ram-type, manufacturing or bed type and planer-type milling machine.

  • Solid cast iron construction throughout.
  • Spindle stop with micro-adjustable setting.
  • Chrome plated precision ground quill. 
  • Table locks for high rigidity.
  • Heavy-duty saddle supports full width of table.
  • High precision ground vertical and cross ways.
  • Class 7 spindle bearings.
  • Lower noise and convenient operation.
  • Dovetail ways X,Y & Z.
  • Adjustable gibs on table.
  • Fine down feed on quill.
  • Head tilts to 90° both ways. 360° rotation on horizontal surface.
  • Adjustable table stops for accurate stops for cuts and repeatability.
  • Variable speed frequency drive allows speeds from 200 to 2250 RPM.
  • Forward/Reversing switch with emergency stop.
  • Fold up safety handles.
  • Adjustable travel stops on X, Y & Z.
  • Scrapping technology X,Y & Z.   

Milling Machine optional accessories 

There are multipurpose optional accessories for milling machine, which will increase the working efficiency and add the possibilities for more cutting methods.

6

Enclose Stand

6

Power Feed

Coolant System for High Quality Vertical Milling and Drilling Machine

Coolant System

Quartz Lamp for High Quality Vertical Milling and Drilling Machine

Quartz Lamp

2 axis DRO System for High Quality Vertical Milling and Drilling Machine

2 axis DRO System

3 axis DRO System for High Quality Vertical Milling and Drilling Machine

3 axis DRO System

Milling Vise for High Quality Vertical Milling and Drilling Machine

Milling Vise

Clamping Kits for High Quality Vertical Milling and Drilling Machine

Clamping Kits

Milling Chuck for High Quality Vertical Milling and Drilling Machine

Milling Chuck



  1. Variable speed frequency drive allows speeds from 200 to 2250 RPM
  2. Fold up safety handles.
  3. Head tilts to 90° both ways. 360° rotation on horizontal surface.
  4. Lower noise and convenient operation.
  5. Table locks for high rigidity.
  6. Cast iron construction throughout machine
  7. Forward/ Reversing switch with emergency stop.
  8. High precision ground vertical and cross ways.
  9. Spindle stop with micro-adjustable setting.

 

This heavy duty milling machine compared to other similar products belongs to high quality level.

Model No. YES-626I
Spindle Taper MT3 or R8 or NT30
Spindle Max. Travel 3'' (75mm)
Spindle Feeding Manual
Spindle Speeds 200~2250 RPM (Inverter)
Distance, Spindle To Table Surface (Z) 0"-13-3/4"(0-345 mm)
Size Of Working Table 6"*26" (152*600 mm)
T-Slots Size (Number) 3/8" (3 slots)
Longitudinal Table Travel (X) 14-1/2" (370 mm)
Cross Table Travel (Y) 6" (150mm)
Vertical Travel Of Table (Z)     14-3/4" (325mm)
Motor 1.5HP 3PH
Swing 6.1" (155 mm)
Lead Screw for Drill Chuck 1"*8 TPI or 3mm Pitch
Vertical Head Tilt Angle (R&L) 90°
Ram Swiveling Angle 360°
Net Weight 305 KGS
Gross Weight  375 KGS
Machine Dimensions 27½" x 21"
Back to the top
Related products